Porter's Original Paints Boncote Cement Paint

Porter's Original Paints
Boncote

Boncote cement paint is a cement based coating made from Portland Cement designed to be very hard wearing and weather resistant, while at the same time creating a soft mottled finish. Since 1920 Boncote has been used successfully under the most trying conditions from cyclonic rain to extremes of heat and cold, always proving it's strength, durability and beauty. Boncote is non-combustible, self-cleaning and environmentally safe.

Boncote is suitable for application to previously painted surfaces, absorbent cement, concrete block, stucco or rendered surfaces, face and common bricks (not glazed), bagged brickwork, calcium silicate bricks, sandstone, Mt Gambier and Coralline Limestone. For a slightly bagged effect up to 50% sand can be added to the Boncote mix. Boncote is not suitable for wood, glazed bricks or tiles or non-porous surfaces.

SIZE AND COVERAGE RATE:
Over cement render or bagging approximately 6 square metres per kg. Over brickwork or masonry blockwork, approximately 5 square metres per kg. These figures can slightly vary depending on porosity and texture of surface.
2 coats recommended.
Sizes: Sample pot, 1kg, 10kg & 20kg.

BONCOTE SURFACE CONDITIONER

For every 20kg drum of Boncote used, a 4L can of Surface Conditioner is required.
Sizes: 1L, 4L & 20L.

Porter's Home I Contact Porters Now! I Visit Our New Website

Copyright © 1997 Spec-Net Pty Ltd

	Boncote cement paint is a cement based coating made from Portland Cement designed to be very hard wearing and weather resistant, while at the same time creating a soft mottled finish. Since 1920 Boncote has been used successfully under the most trying conditions from cyclonic rain to extremes of heat and cold, always proving it's strength, durability and beauty. Boncote is non-combustible, self-cleaning and environmentally safe.
Boncote is suitable for application to previously painted surfaces, absorbent cement, concrete block, stucco or rendered surfaces, face and common bricks (not glazed), bagged brickwork, calcium silicate bricks, sandstone, Mt Gambier and Coralline Limestone. For a slightly bagged effect up to 50% sand can be added to the Boncote mix. Boncote is not suitable for wood, glazed bricks or tiles or non-porous surfaces.
	SIZE AND COVERAGE RATE: Over cement render or bagging approximately 6 square metres per kg. Over brickwork or masonry blockwork, approximately 5 square metres per kg. These figures can slightly vary depending on porosity and texture of surface. 2 coats recommended. Sizes: Sample pot, 1kg, 10kg & 20kg.